| Frequency Response | 10-60 | | Principal | MI | | Channel Separation at 1KHz | 35 | | Imput Load | 47K | | Output at 1KHz 5CM/sec. | 5mV | | Recommended Tracking Force | 1.5 | | Stylus Type | E | | Inductance | 45mH | | Resistance | 475 | | Compliance CUs | 20 | | Stylus Replacement U=user | U | | Mounting | S/P | | Weight | 5.5 | | The Prestige Gold1 & Silver1
The newly redesigned Silver1 and Gold1 have had their coil design
reconfigured, and the effective moving mass of their generating system
has been reduced by 17%. The Silver1 and gold1 models use a four piece
OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen
free copper wire in the coils and Grado's specially designed elliptical
diamond mounted on a brass bushing. The Gold1 model is selected from
the Silver1 production run and meets higher test specifications.
Approximately 5% of the production run meet these standards and become
Gold1 models.
What People are saying about the Gold... | "It was lively and detailed but never edgy on vocal sibilants, and didn't over-emphasis leading edges on acoustic guitar." | | "Beefheart's Clear Spot, the undoing of many an under-performing cartridges, didn't faze the Grado." | | "It's a definite Best Buy!" | | Hi Fi Choice / Alan Sircom | "The Prestige Gold's sound was readily identifiable, but after just a few seconds it didn't matter much, so engaging were the results."
Wayne Garcia - The Absolute Sound |
|
