|
Frequency Response |
10-60 |
| Principal |
MI |
| Channel Separation at 1KHz |
35 |
| Imput Load |
47K |
| Output at 1KHz 5CM/sec. |
5mV |
| Recommended Tracking Force |
1.5 |
| Stylus Type |
E |
| Inductance |
45mH |
| Resistance |
475 |
| Compliance CUs |
20 |
| Stylus Replacement U=user |
U |
| Mounting |
S/P |
| Weight |
5.5 | |
The Prestige Gold1 & Silver1
The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.
What People are saying about the Gold...
| "It was lively and detailed but never edgy on vocal sibilants, and didn't over-emphasis leading edges on acoustic guitar." |
| "Beefheart's Clear Spot, the undoing of many an under-performing cartridges, didn't faze the Grado." |
| "It's a definite Best Buy!" |
| Hi Fi Choice / Alan Sircom |
"The Prestige Gold's sound was readily identifiable, but after just a few seconds it didn't matter much, so engaging were the results."
Wayne Garcia - The Absolute Sound |
|
