10.2 Inch Square Belt, Orbicular

Drive belt for many types of equipment.

10.2 Inch Square Belt, Orbicular

.039 Inch / 1.0mm Thick and Wide; 10.2 Inch / 25.9cm Inside Circumference
This belt is found in but NOT limited to:
MC-B500BK01 MCB-400 MCB-500 RS-272US RX-CT870 RX-DT640 Deck 2 RX-FT570 Deck 2 RD-4550 WM-18 WM-F18 TOSHIBA KT-4039 TOSHIBA KT-4049 Orive TOSHIBA KT-4349 TOSHIBA KT-A930

Meets or exceeds OEM specs. Found in many types of equipment.

This belt is of recent manufacture. Original belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, formimg highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.

Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the 'lip' or ridge around the underside of the platter, so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.

Price: $3.95
Buy Product Online | Visit Store Home

Manufactured by AVCR (House Brand)

Other Items from MC-B500BK01

10.2 Inch Square Belt, Orbicular - Drive belt for many types of equipment.
6.5 Inch Square Belt, Medium - Drive belt for many types of equipment.

Return To Shop phonograph needles, turntable belts and phono cartridges at TurntableNeedles.com


Shopping cart powered by MonsterCommerce e-commerce solutions.