Drive belt for many types of equipment.

Square Belt Small

2.9 Inch Square Belt, Small


.046 Inch / 1.2mm Thick and Wide;
2.9 Inch / 7.4cm Inside Circumference (total length)
Belt is of recent manufacture. Meets or exceeds OEM specs.
Found in many types of equipment.
This belt is found in but NOT necessarily limited to:

found in microsoft XBOX model TS-943-MS25 by samsung and likely similar models


TC-WA8ES ( Total) TC-RX390 FR TC-K370 AKAI GX-1900 AKAI X-2000S 8500R 90521 CRAIG 2636 RC-70 3-5275A SC-2520 LEAR JET A-72 AG-4000 AG-4054 MGA X-12 End-Stop RS-296 RS-M02 CT-660 B CT-760 B CT-960 B CT-1060W CT-1170 CT-S22 B CT-S44 B CT-S77W KD-333 KP-333 14-849 CC-10FM FT-433M N M-2470 M-2544 M-2553 M-2555 M-2557 M-2562 M-2563 M-9920-2 M-9921K RD-4250 BVU-50 DXA-C70 DXA-C90 DXA-S70C DXA-S90C HCD-C50 U HCD-H61 M FR MHC-C7EX TC-H7900 TC-K461S TC-K561S TC-K615S FR TC-KA1ES TC-RX311 FF Rew TC-RX370 TC-WR521 FF Rew TC-WR535 TC-WR590 FF Rew TC-WR635S FF Rew TC-WR670 TC-WR701ES TC-WR735S TC-WR745S FR TC-WR765S TC-WR801ES FR TCH-1600 TCH-2600 TCH-3600 TCW-370 TCW-411 TCW-511 TCW-R87ES TCW-R570 TCW-R775 225 V-7 V-40 V-50 TOSHIBA CT-41Z TOSHIBA PC-X22

  • Meets or exceeds OEM specs. Found in many types of equipment.
  • This belt is of recent manufacture. Original belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, formimg highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.
  • Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the 'lip' or ridge around the underside of the platter, so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.

      • Price: $2.95
      Buy Product Online | Visit Store Home
       
      Manufactured by AVCR (House Brand)


       Other Items from SL-DL1

        2.9 Inch Square Belt, Small - Drive belt for many types of equipment.

       
        Return To Shop phonograph needles, turntable belts and phono cartridges at TurntableNeedles.com

       

       
      e-commerce solutions
      Shopping cart powered by MonsterCommerce ecommerce software.