Comes complete with 2.0 mil sapphire all-speed 'compromise' needle N4-2)
REPLACES:

ELECTRO-VOICE 73
JENSEN 21
SHURE W70
SHURE P25
From Shure literature:
The voltage output of the W70 (at 1000 hertz) is 3 volts from fine-groove [16/33/45] records and 4 volts from standard-groove records; recommended needle point load 12 grams; cut-off freq. 4kHz; net weight 7 grams. The W70 is provided with pin jacks to make connections at the cartridge terminals. When replacing the Webster cartridges with the W70, the leads must be cut from the Webster cartridge. Remove above 1/8" insulation from the loose ends, and solder the leads to the pin-jacks before inserting tehm on the terminal pins. A set-screw that may be used in place of the installed thumb-screw in the accessory envelope.
WEBSTER C2
WEBSTER C201
WEBSTER C3
WEBSTER C3
WEBSTER C7
WEBSTER C7-1
WEBSTER C7-2
WEBSTER C7-3
WEBSTER C8
WEBSTER C8-1
WEBSTER C8-2
WEBSTER C8-5
WEBSTER C9
WEBSTER C9-1
WEBSTER C9-3
WEBSTER C9-4
WEBSTER C9X
WEBSTER C10
WEBSTER C10-8
WEBSTER CX
WEBSTER C11
WEBSTER C11-1
WEBSTER C12
WEBSTER C14
WEBSTER C14-8
WEBSTER C15-4
WEBSTER C-100
WEBSTER C-100-1
WEBSTER C101
WEBSTER C101UX
WEBSTER Series WX
WEBSTER T14
WEBSTER U200
VOICE of MUSIC (V-M) 5745 5866