The socket must be .300 inches in diameter, have a notch in the top for the headshell alignment pin and have four contact in the socket in a square pattern as well as a rotating locking on the tonearm to hold this headshell in place. NOT for curved S type tonearms.
If you have a single set screw on the tonearm that holds a headshell in place, then this is not the headshell for you.
CNC machined from solid aircraft aluminum block. The total weight including the silver wireset leads, fingerlift, the two longest screws pictured and the two nuts is 11.3 grams.
audio-technica AT-LP3WH turntableaudio-technica AT-LP3BK turntableTEAC TN-300 turntableDENON DP-300F turntableMusic Hall MMF-1.3
TEAC AT-HS3 headshellDENON PCL-310 headshell