10.5 Inch Long Large Round Electronics Rubber Drive Belt

This belt is found in, but NOT limited to, the following Equipment:
ACECORD 500 ALLIED (Knight) TB-998 AMPRO 730 AMPRO 731 AMPRO 737 COLUMBIA 4900-87 CONCORD 103 CONCORD 105 CRESCENT 672 CRESCENT 673 CRESCENT 490087 GIBBS GT-80 GRUNDIG 3 GRUNDIG 4 GRUNDIG 9C-10 GRUNDIG B-28182 KNIGHT KN-4025 KNIGHT KN-4100 RK-100 RK-101 1V-9000 MITCHELL 425 A MITCHELL 1290 MITCHELL 490087 RCA 8TR3 RCA FTR-2 RCA FTR-3 RCA TTR-2 RCA TTR-3 AT-4300 SCOTT AT-4290 SCOTT AT-4300 SEARS 232 SEARS 2230 SEARS 2234 SEARS 3040 SEARS 3060 SEARS 3070 SEARS 4232 SEARS 6072 SEARS 6074 SEARS 7074 SEARS 8070 SEARS 8072 SENTINEL 10 TC-630 O P STARLINE 101 WILCOX-GAY 314 WILCOX-GAY C-10 1C-10 25031

Meets or exceeds OEM specs. Found in many types of equipment.

This belt is of recent manufacture. Original legacy belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, forming highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.

Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the hub around the underside of the platter,so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.