Round Belt, Large 12.4 Inch

Stock#:RBL12.4

Brand:AVCR

Reviews (4)

Rubber drive belt (band) for consumer electronics.

$9.00

Oregon USA Stock - 0-24hr Shipping!

Qty:

9 points can be awarded to your webstore account (see FAQ).

Description
Reviews
Specs

Popularity

12.4 Inch Long Large Round Electronics Rubber Drive Belt

This belt is found in, but NOT necessarily limited to, the following Equipment:

PENNEY JC 6217
PENNEY JC 6431
WEBSTER-ECHO 117
AMPEX 601 (Non-series)
AMPEX 602 (Non-series)
AUTOMATE P-600BF
AUTOMATIC RADIO ESP-5457A
CIPHER 2
CONCORD 509D
CONCORD 5090
FME 37C
FME 47A
HOFFMAN 726
JVC RD-1695
JVC RD-1696
JVC ST-R26
KNIGHT KN-4035
KNIGHT KN-4350
MAGNAVOX 1K-8980
MAGNAVOX 1K-8981
PANASONIC RS-765
PENNEY JC 651-0714
PENNEY JC 3520
PENNEY JC 6520
STEWART 537A
WEBSTER-ECHO 101
WEBSTER-ECHO 108
WEBSTER-ECHO 109
WORLD ELECTRONICS PC-250
WORLD ELECTRONICS PC-300

Meets or exceeds OEM specs. Found in many types of equipment.

This belt is of recent manufacture. Original legacy belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, forming highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.

Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the hub around the underside of the platter, so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.

Ampex take up belt

Worked like an original part. No problems with replacement. Will use Turntables and Needles again!

Helpful?

Reviewed by: Gary from Lebanon, PA. on 7/27/2015

Works like a charm

I picked this belt up for a JVC RD-1695 Reel To Reel tape deck after looking all over for the right part. The supply reel of the deck had been lagging, causing a warble as the tape caught up every 10 seconds or so. I swapped the old drive belt out with this one and the problem disappeared completely. My 40+ year old deck now works like new.

Helpful?

Reviewed by: Kevin from Denver. on 5/2/2019

reel to reel belt

fits perfectly, works great, thanks

Helpful?

Reviewed by: Gene Kelley from Unity Maine. on 1/8/2020

Vintage Texhnique RS-740 US Reel to Reel

For anyone looking for the main rewind belt for this deck, l ordered the recommended 12.4 belt. Having got it, the belt was millimeters too small.. but i was able to work it into opperation. Spoke to customer support and the next size avail was 12.8. Otherwise the belts were perfect and support was great... this is just a fyi.. the RS-740 US is not in the list.

Helpful?

Reviewed by: David from New York. on 1/7/2023

Inside Circumference	Cross Section	Material	Country
~12.4"/ 30.7cm	~0.139 (9/64ths)"/ 3.5mm	Synthetic Rubber	USA

Tech-Approved Belt Push/Pull Hook Installation Tool

(31)

$11.25

Oregon USA Stock - 0-24hr Shipping!

Shopping Cart

0 item(s) in your shopping cart

Round Belt, Large 12.4 Inch

Price

Availability:

Reward Points

12.4 Inch Long Large Round Electronics Rubber Drive Belt

RBL12.4 Specifications:

Related Items:

Recently Viewed Items

Mailing List

Privacy Policy