This belt is of recent manufacture. Original legacy belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, forming highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.

Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the hub around the underside of the platter,so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.

This belt is found in, but NOT limited to, the following Equipment:
F-594 AHW1 HW1 HW1A HWF CONCORD 727 CONCORD 776 -D DOKORDER 7200 EVANSTON SIGNAL 55 GRUNDIG TK-600 GRUNDIG TS-600 KW-4066 KW-5066 MIDLAND 12-150021 MUNTZ 130 MUNTZ 140 MUNTZ HW-1 MUNTZ HW-12 MUNTZ HW-300 MUNTZ HW-500 MUNTZ MR-10 NATIONAL RS-776S RQ-706S RQ-755S RS-755S RS-770S RS-776S 6235 T-500 TR-88 FT-909 STEW-MASTER 6-BC STEREO MASTER MarkXIII A-6100 TELEFUNKEN M-203 Delux TELEFUNKEN M-204U (VM) 20355 WEBCOR 2000 WEBCOR 2003 YORK R-5280 Clutch

recorder belt

Great data base for finding the right belt. Price on the high side, but fit and works fine Thanks....

Helpful? 1 of 1 Found Helpful

Reviewed by: Dave from chicago. on 11/1/2015

tape recorder drive belts

i found the part number for my 50 year old machine easily and its great to have it working again

Helpful? 1 of 1 Found Helpful

Reviewed by: trotter from adelaide south australia. on 12/29/2015

15.6" Round Belt

Excellent product. I used this belt to restore my Reel-to-Reel tape recorder. It did the job with excellent results. Thanks T&N.

Helpful?

Reviewed by: Ray from South Australia. on 8/12/2019

Inside Circumference	Cross Section	Material	Country
~15.6"/ 39.6cm	~0.103"/ 2.7mm	Synthetic Rubber	USA

Tech-Approved Belt Push/Pull Hook Installation Tool

(20)

$9.50

Oregon USA Stock - 0-24hr Shipping

Round Belt, Medium 15.6 Inch

Price

Availability:

Reward Points

15.6 Inch Long Medium Round Electronics Rubber Drive Belt

RBM15.6 Specifications:

Related Items:

Recently Viewed Items

Mailing List

Privacy Policy