Square Belt, Medium 5.9 Inch

Stock#:SBM5.9

Brand:AVCR

Reviews (3)

Rubber drive belt (band) for consumer electronics.

$6.00

Request Stock Alert via Wait List

6 points can be awarded to your webstore account (see FAQ).

Description
Reviews
Specs

Popularity

5.9 Inch Long Medium Square Electronics Rubber Drive Belt

This belt is found in, but NOT limited to, the following Equipment:

SEARS-Silvertone-Tower-Colonial-LXI	564.9799035 29676
SONY	CD-PCX455
SONY	HC-D441
SONY	HS-TH1750

SANYO P-33

Meets or exceeds OEM specs. Found in many types of equipment.

This belt is of recent manufacture. Original legacy belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, forming highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.

Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the hub around the underside of the platter, so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.

Small Square Drive Belt

This small belt was a perfect sized replacement for my cd tray drive - which I could no longer get from JVC. And the belt was shipped and delivered in less than a week. My hats off to turntableneedles.com!!! JEFF

Helpful?

Reviewed by: JM from West Central Ohio. on 4/15/2013

Sony CDP-85ES

Finding a belt for the motor that drives the tray underneath was a problem. It was a 6.0 in medium which doesn't exist. 5.9 or 6.2. It turned out the 5.9 worked like a charm. Back and running again.

Helpful?

Reviewed by: Michael M. from Maryland. on 11/4/2022

Good fit for linear-tracking turntable

I had issues locating the right belt for a Sears #564.97990350 Proformance LT turntable. The TT itself is direct-drive, but the tracking sled is belt driven. The belt part #: 46-39100603 on Sears PartsDirect was no help, since it did not specify size. Other similar belts I tried did not have sufficient cross-section to provide enough torque to drive the sled past the shutoff switch, but this one does. Would probably also work for the similar models of this TT, Sanyo P33 and LXI 29676.

Helpful?

Reviewed by: David from PA. on 9/29/2023