Inside Circumference (total length) = 33.1 inches. Certified to be exactly the same length, durometer and quality as the original Empire DB-508 part# that was provided to us in 2006. However it seems Empire saw fit to change the length of the DB-508 that was shipped at various times so proceed with extreme caution.
WARNING WARNING WARNING: Much confusion exists as to the correct size replacement belt for ALL Empire brand turntables. That's because Empire saw fit to build turntables with, in some cases as many as five different chassis under the same model number, thus requiring as many as five different belt lengths. This means it is absolutely impossible to rely on model number alone to source the correct belt. An absolute disaster!
So, the genuine Empire belt labels pictured above are wrong. They should read some not all. You MUST accurately measure your model's belt path with a string, then multiply the result by 0.95 & 0.97 and look for a length match below that is within the range of 3-5% less than your string measurement.
This belt is sometimes found in, but NOT necessarily limited to, the following Equipment: