Same 2.25 grams nominal tracking weight for continued lesser wear as compared to 3+ grams on many DJ needlz
Same look/color. Matches original N25C body.
Exclusive: Cantilever is painted with both neon and glow-in-the-dark paint so it stands out perfectly under regular & UV light.
Extensively tested/upgraded at the BLISS laboratory USA with Shure cartridge and Shure DJ record by our senior electronics technician.
Same tracking stiction at 2.25 grams both forwards and backwards for error free mixing and scratching every time.
100% satisfaction guaranteed - 1 year warranty against factory defect - excludes incedentals like vinyl replacement. Warranty void if customer bends/abuses cantilever.
Tracking tested forwards & reverse to ensure you get the same or better performance when compared to the original Shure stylus. Start your anti-skate setting at 0 grams if you will be back cueing etc.
Made in Japan - Finished in USA
also works as a 1.5 - 3.0 gram substitute for: Discontinued SHURE Stylus N25C (red, 4 - 5 gramsfor Shure M25C)
Replaces: SHURE N25C-Z needle Used In: SHURE M25C cartridge Original needle color is usually: RED
Also crosses to: ASTATIC NEEDLE N953 EVG NEEDLES PM3148D FIDELITONE NEEDLES A604 SHURE NEEDLES SS35C SS78E SHURE CARTRIDGES SC35C TRANSCRIBER NEEDLES PS633 RADIO SHACK, REALISTIC NEEDLES RS633
NOTE: Because this needle is designed for use specifically with SHURE cartridges, it can be found in numerous brands of turntables. In some cases the cartridges for this needle may be original equipment supplied with a new turntable, but was also likely to have been selected at time of sale to complete a turntable sold without a cartridge or later as an upgrade to the original cartridge supplied by the turntable manufacturer. This needle should be matched primarily to the SHURE cartridge type not necessarily the turntable.