High quality aluminum headshell that is an Excellent upgrade over the popular and universal headshell. Generally it will fit any turntable with a 'S' (SME/JEI type)shaped tonearm. It requires an empty socket at the front end of the tonearm. The socket must be .315" in diameter, have a notch in the top for the headshell alignment pin and have four contact in the socket in a square pattern as well as a rotating locking on the tonearm to hold this headshell in place. If you have a single set screw on the tonearm that holds a headshell in place, then this is not the headshell for you.