Caution: At a 1/4 inch, this is a w-i-d-e belt, as far as turntable standards go. Before choosing this belt as the right belt for your model you will need to verify that the 'channel' on the brass drive motor pulley is wide enough for a 1/4 inch belt. If in doubt, you can always use the FBM25.0 in 'Related Products' below. The FBM series is 3/16th's of an inch wide. We offer this 1/4" wide FBL25.0 as it may last longer, having the most rubber.
SONY tc-560 series (this is the closest match)