Round Belt, Small 5.9 Inch for Audio Tape Players etc.

Home>Rubber Drive BELTS>BY SIZE DESCRIPTION>ROUND BELT SMALL > Round Belt, Small 5.9 Inch for Audio Tape Players etc.
$6.75
retail
$7.95
Save
$1.20 (15%)
Add to Cart
Brand: AVCR
Stock#: RBS5.9
Reward Points: 6.75
Availability: Oregon USA Stock - 0-24hr Shipping!

Description

5.9 Inch Long Small Round Electronics Rubber Drive Belt




Partial Application List, see our Find My Player Tool for your Model.

This belt is found in, but NOT limited to, the following Equipment:
AIREQUIPT 150
AIWA TP-741
AKAI CS-707D
ALLIED RADIO; Knight TD-1095
ALLIED RADIO; Knight TD-1099
ANSCO [GAF] 2488
ANSCO [GAF] 2788Z
BASF 9200
CALIFONE; Roberts; Rheem AV-3600
CHANNEL MASTER 6456
CROWN CTA-4400
DUAL; United Audio C-822
DUAL; United Audio C-828
DUAL; United Audio C-919
DUKANE 594-62
DUKANE Cassette
FISHER RADIO C-3700
FISHER RADIO RC-808
HITACHI TRQ-737
JCPENNEY; Penncrest; MCS 3241
JVC; Nivico 9470
JVC; Nivico CP-1690U
LABELLE 65-905
LAFAYETTE LRK-1600
LAFAYETTE RK-510
MARANTZ; Superscope CRS2100
MIRANDA 626 Auto Sensor
MOTOROLA TC894AX
NAKAMICHI 250
NAKAMICHI 350
NAKAMICHI 500
NAKAMICHI 550
NAKAMICHI 600 Mark II
PACKARD-BELL; Teledyne; Bell & Howell Anamorphic Lens [16mm Projector]
PACKARD-BELL; Teledyne; Bell & Howell TRAK-15
PIONEER; Centrex CT-F2121
PIONEER; Centrex T-3300
PIONEER; Centrex T-3300A
PIONEER; Centrex T-3500
RAYTHEON 603
RAYTHEON 10903 Deck
REALISTIC; Radio Shack; Optimus SCT-6 [14-896]
REALISTIC; Radio Shack; Optimus SCT-6B
ROBERTS see also Califone 100
SCOTT; H H 3600
SHARP RD-428U
SHARP RD-428UA
SHARP RD-455U
SHARP RD-457AV
SONY TC-160
STANDARD RADIO SRT-178DKU
SYLVANIA CT-160-W-1
SYLVANIA CT-170-W
TEAC 220
TEAC A-24
TEAC A-25
TELEX C-76
TOSHIBA KT-202
TOSHIBA RT-8155S
UNISET TC-85M
VIEWLEX Mark l Tape Duplicator





  • Meets or exceeds OEM specs. Found in many types of equipment.
  • This belt is of recent manufacture. Original belts no longer exist. If they did, they'd be too old to sell in good conscience. As far as we can tell, even if the manufacturer name was stamped on the belt, all belts supplied with original turntables were outsourced to a belt specialist manufacturer, like ours are today. Our belts are made using state-of-the-art vulcanization chemistry, formimg highly crosslinked polymetric structures which ensure long-term elastic stability even under the harshest conditions.
    • Prior to installation of your new belt, the belt path should be cleaned. Here in the repair shop we would use common household rubbing alcohol (isopropyl) or a similar solution to clean the old, (often invisible) belt residue from the entire belt path, including the 'lip' or ridge around the underside of the platter,so it doesn't contaminate the new belt. With the belt off, we would get the turntable into play condition and hold an alcohol soaked Q-tip on the side of the spinning belt motor pulley. It's amazing how much black contamination comes off from the old belt. See our belt installation page for related details.

    Related Items:

    Tech-Approved Belt Push/Pull Hook Installation Tool
    $11.75
    Oregon USA Stock - 0-24hr Shipping!
    Details