Genuine Garrard C2 slide / shoe / sled, Quick-Release Fixed Position Cartridge Mount*
2022 N.O.S. Limited Offer: Garrard C2 type slide for Garrard type C2 or C2A sled shoe.
Found in but may not be limited to the following Garrard models:
GARRARD SYNCRO LAB SL65B, SL-65B
GARRARD SYNCRO LAB SL72, SL-72
GARRARD SYNCRO LAB SL72B, SL-72B
GARRARD SYNCRO LAB SL95, SL-95
GARRARD SYNCRO LAB SL95B, SL-95B
GARRARD SP20B, SP20B
GARRARD 40B, 40B
The threads built into this New Old Stock (N.O.S.) genuine Garrard C2 plug-in head are called "7BA". They are unique to British products. Your typical american 3-48 or metric screws with not work. So after extensive reserach we now have a very limited supply of C2 sleds that come with our new 7BA hardware kit (extensive research already done for you). for adaptation to most any cartridge...
.:CUSTOM C2 SCREWKIT:.
Two each of:
1/8" Steel
5/32" Steel
7/16" Steel
1/2" Steel
1/2" Brass with steel nut so you or your favorite handyman can back off the nut to "fix" the threads after cutting the brass screw to the desired length if needed.
nylon washers
All versions include above kit. When purchased with a cartridge installed, BLISS Labs, here in Corvallis Oregon, has already custom cut brass screws to the exact length needed for each cartridge. This sled is very unforgiving regarding the length of screw required for various cartridges. You have to be very careful not to allow the screw to end up being too long so it does not interfere with installing the sled up under the headshell.
also can substitute for Garrard 73361, 73510/001
