CRITICAL CAUTION: As of press time there appears to be up to three belts sizes that may be correct for various production runs of the Revolver turntable. This belt is correct for *SOME* Revolver turntables. You will need to compare at least the thickness to your old belt, or if missing, check the "groove radius" (R) which is the width across the "U" shaped opening on your pulley.
If your pulley opening is:
Roughly 0.075" or slightly wider then this 36" belt should be correct.
Roughly 0.139" or slightly wider, then you will need to measure the distance around the belt path. If you measure about 34.8" (give or take) then choose the
RBL33.0 belt, if you measure about 36.4" then choose the
RBL 34.5.
This belt is found in, but NOT limited to, the following Turntables:
REVOLVER (Known to be correct for some Revolver tables depending on the revision of pulley and or platter. Proceed with extreme caution)
REBEL (believed to be correct for all Rebel tables as of press time)
