CRITICAL CAUTION: As of press time there appears to be up to three belts sizes that may be correct for various production runs of the Revolver turntables. This belt is correct for *SOME* Revolver turntables. You will need to compare at least the thickness to your old belt, or if missing, check the "groove radius" (R) which is the width across the opening of the "U" shaped opening on your pulley.
If your pulley opening is:
Roughly 0.139" or slightly wider, then you will need to measure the distance around the belt path. If you measure about 34.8" then choose the
RBL 33.0 belt, if you measure about 36.4" then choose this RBL34.5.
